Rough Terrain Telehander Training
A rough terrain telehander , is a machine widely used in agriculture and industry. It is similar in appearance and function to a forklift but is more a crane than forklift, with the increased versatility of a single telescopic boom that can extend forwards and upwards from the vehicle. On the end of the boom the operator can fit one of several attachments, such as a bucket, pallet forks, muck grab, or lift table.
The most common attachment for a tele-handler is pallet forks and the most common application is to move loads to and from places unreachable for a conventional forklift. For example, telehandlers have the ability to remove palletized cargo from within a trailer and to place loads on rooftops and other high places. The latter application would otherwise require a crane, which is not always practical or time-efficient.
Ace Trainers deliver professional accredited training in the safe operation and driving of Forklift Truck Training.
- Course introduction and induction
- Health & Safety at Work Act 1974 – approved code of practice
- Operator safety and observation
- Pre-Shift checks
- Defect reporting procedures
- Lift Truck stability – engineering principles and weight assessment
- Driving within simulated working conditions
- Manoeuvring skills
- Rated capacity/load centre
- Hydraulic system and use of the controls
- Stacking/de-stacking – load handling skills
- Vehicle loading and offloading
- Refuelling and recharging procedures including battery handling and housing
- Theoretical examination
- Practical examination
When conducting training at customers’ premises we will require the following: an open area either indoors or outdoors, a number of pallets both empty and loaded, the use of any racking if available and a room in which to carry out the theory training.
As an accredited training organisation we can offer a National photo ID certificate for no additional cost. This then enables the Trainee to operate any machine (with permission) anywhere in the UK. Their names and details are kept on a National Operators Registration Scheme Database. The certificate is valid throughout the UK and will be recognised by both employment agencies and perspective employers.
*This is optional, and if employers prefer, we can supply in-house certificates, only allowing the candidates to operate for your company Only.*
All training is accredited via ITSSAR – Independent Training Standards Scheme and Register
Thanks Mike for the professional and constructive way you have organised both our management and drivers! The information and instruction you have supplied regarding our safety, procedures and responsibilities now ensures we are compliant and more efficient. We look forward to working with in the future.
Roy & Marianne Edwards,
Very Professional and a very helpful Company customer service seems a thing of the past but not for Ace Trainers Would recommend ,Thanks you for helping me pass my Drivers CPC Course
Thank you very much for the training session Lin! It was great and we will be in contact for any more of our future needs
“At Guest Express Transport we have 28 members of staff with approx. 4 that actually hold a national forklift certificate and the rest have a very good knowledge of fork truck driving. I decided to put one member through the instructors course with the view to have all staff members trained to the same level and a level that we as a company are satisfied with. I ended up doing the course myself and I am actually glad I did as it really does highlight the bad habits we all pick up over the years and dangers we put ourselves through every day without even realising!! But fortunately Zoe came in and changed all that within 5 days. I would recommend Ace Trainers for this as they were by far the best on price (I had 4 other quotes as a comparison) and like Guest Express Transport are a family run business and appreciate your business and did go the extra mile to make sure we / I was satisfied. I have now also booked our next 5 years of drivers CPC training, again at a very competitive price and will continue our relationship whenever I need professional people to train my staff to a professional level” In House Instructors Course – 07/01/2013
Thanks to Ace Trainers we were booked onto a course with very little notice (thanks to a cancellation) at a very competitive price. The level of instruction was very thorough and our novice fork truck driver was very comfortable with the training. All round; extremely pleased with the service provided.
The service was excellent from point of contact all the way through to the actual training itself We will be using Ace Trainers again
I cannot thank you enough for your assistance and professionalism regarding an enquiry I made at the 11th hour so to speak. It is so refreshing to receive a prompt and professional service. I do wish you every success future as you deserve it. The level of training received was excellent. Thank you again.
JB, Facilities Manager
Hi , just a quick message to say that today we had Ryan take a course for 3 of our staff on counterbalance forklifts. The feedback I have received is that the course was delivered very professionally and a lot of new information was shared . Our on site training facilities were used to deliver the theory test which Ryan will now be familiar with . I would like to say we were impressed by Ryan and any further training we require within the Millcroft group we will contact you for a quote .
Mike and the Ace team refreshed my forklift operation courses on both Bendi and Counterbalance lift trucks. The experience was friendly, supportive and professional from start to finish and at an extremely competitive price. I have no …More Mike and the Ace team refreshed my forklift operation courses on both Bendi and Counterbalance lift trucks. The experience was friendly, supportive and professional from start to finish and at an extremely competitive price. I have no hesitation in recommending the Ace team, the name really does describe the service! Well done!Stuart Gordon
With being made redundant and with warehouse skills but not fork lift qualified, I attended a counter balance and reach fork lift truck operator course with Ace trainers at their training centre in Basingstoke. The instructors there, male and female were impressive and very professional. They are well knowledgeable in all subjects relating to fork lifting including Health and Safety regulations. Armed with my new/previous skills and knowledge gained from Acetrainers, I have landed a brilliant and dare I say, well paid warehouse management job.Thanks Mike and your instructors, you are the best. PS Will be sending my guys to you for training when they are due for renewal. George Rater